Repair Plates and Brackets
The Crompton range of fixings plates and brackets from ERA perform a wide variety of tasks. From the angle plate used when strengthening joints, to the tee plate or corner brace used in the construction of T joints; and mending plates that are used to construct butt joints. All are available in a variety of sizes, finishes and designs. We even have a range of handrail brackets and shelf brackets too.
Angle Stretcher Plate, 38mm (1.1/2"), Zinc Plated
Angle stretcher plates can be used for multiple fixing applications such as worktop joints.
Corner Brace Counter Sunk Inside
Corner braces are used in the construction of corner or tee joints in frames. Countersunk on the inside only for fixing angled joints.
Corner Brace Counter Sunk Both Sides
The corner brace is used in the construction of corner joint in frames. Countersunk both side of plate for fixing together joints either inside or outside frames.
Corner Plate
Corner plates are used in the construction of ‘L’ joints in light framing.
Mending Plate
Used in the construction of butt joints in light framing and as a strengthening plate for split spars.
Stayless Shelf Bracket
Angled bracket ideal for supporting a wooden shelf in your garage, shed or utility room.
Tee Plate
The tee plate is used in the construction of T joints in light frames. Two plates, one each side should be used to give the strongest possible joint.
